Free Massachusetts CDL Hazmat Endorsement Test Practice Test

Sample CDL Hazmat Endorsement practice questions

Try a few representative questions below. Each includes the correct answer and a short explanation — the same style you'll see in the full practice test.

1. Question 1Incident Response

   A commercial motor vehicle (CMV) placarded for Division 4.3 (Dangerous When Wet) materials is involved in an incident. The driver notices that the material is reacting with water from the fire suppression efforts, producing flammable gas. Which of the following is the MOST appropriate immediate action for the driver to take, assuming it is safe to approach the vehicle?

   • A.Use water to douse the flames and cool the containers.
   • B.Attempt to move the vehicle to a less populated area to minimize risk.
   • C.Evacuate the area immediately and notify emergency services, advising them of the specific hazard.(Correct)
   • D.Apply a dry chemical extinguishing agent to smother the flammable gas.

   Explanation

   Division 4.3 materials are dangerous when wet and can produce flammable gas upon contact with water. The primary concern is the immediate safety of the driver and the public. Evacuating the area and notifying emergency services with specific hazard information is the most critical first step.

2. Question 2Placarding Requirements

   You are transporting a shipment of UN2810, Toxic liquid, organic, n.o.s., with a net weight of 5,000 pounds. The shipping papers indicate a primary hazard class of 6.1 and a subsidiary hazard class of 3. What is the MINIMUM required placard for the cargo tanks of this shipment?

   • A.POISON
   • B.FLAMMABLE LIQUID
   • C.TOXIC
   • D.POISON (6.1) and FLAMMABLE LIQUID (3)(Correct)

   Explanation

   When a hazardous material has a primary and a subsidiary hazard, both placards are generally required if the gross weight of the material requiring the subsidiary placard is 1,001 pounds or more. In this case, both the Class 6.1 (POISON) and Class 3 (FLAMMABLE LIQUID) placards are necessary.

3. Question 3Placarding Requirements

   A truck carrying 1,000 pounds of UN1950, Aerosols, containing flammable gas (Class 2.1), and 2,000 pounds of UN2924, Flammable liquid, corrosive, n.o.s. (Class 3, subsidiary Class 8), is stopped at a weigh station. Which of the following is TRUE regarding placarding for this vehicle?

   • A.The vehicle must display both the FLAMMABLE LIQUID (Class 3) and CORROSIVE (Class 8) placards, as the total gross weight of hazardous materials exceeds 1,000 pounds and the primary hazard is Class 3.
   • B.No placards are required because the individual quantities of hazardous materials are below the 1,000-pound threshold for placarding.
   • C.The vehicle must display the FLAMMABLE GAS (Class 2.1) placard, the FLAMMABLE LIQUID (Class 3) placard, and the CORROSIVE (Class 8) placard because the total gross weight of hazardous materials exceeds 1,000 pounds.(Correct)
   • D.Only the FLAMMABLE GAS placard is required, as it is a Class 2.1 material.

   Explanation

   The threshold for placarding a vehicle with hazardous materials is generally 1,001 pounds or more for any single hazardous material or when the total gross weight of all hazardous materials requiring placarding exceeds 1,001 pounds. This vehicle has 1,000 lbs of Class 2.1 and 2,000 lbs of Class 3/8. Therefore, Class 2.1, Class 3, and Class 8 placards are required.

Want the full exam? Start the free practice test →

Frequently asked questions

Related practice tests

• CDL General
• CDL Air Brakes
• Alabama DMV
• Alaska DMV