Free Indiana CDL Hazmat Endorsement Test Practice Test

Sample CDL Hazmat Endorsement practice questions

Try a few representative questions below. Each includes the correct answer and a short explanation — the same style you'll see in the full practice test.

1. Question 1Hazardous Materials - Emergency Procedures

   A commercial motor vehicle (CMV) transporting a shipment of Division 4.3 (water-reactive) material experiences a leak. The driver notices water entering the cargo area from the outside. What is the IMMEDIATE and MOST critical action the driver must take?

   • A.Open all vents and hatches to allow any generated flammable gas to escape.
   • B.Continue driving to the nearest designated safe parking area to assess the situation.
   • C.Attempt to seal the leak from the inside to prevent further water ingress.
   • D.Stop the vehicle in a safe location away from populated areas and waterways, and contact emergency services.(Correct)

   Explanation

   Division 4.3 materials react with water to produce flammable gases. Stopping safely away from people and water sources is paramount to prevent ignition and environmental contamination. Sealing from the inside could trap gases, continuing to drive is unsafe, and opening vents could expose the gas to ignition sources.

2. Question 2Hazardous Materials - Cargo Tank Inspections

   You are hauling a shipment of UN1203, Gasoline, in a cargo tank. The tank has a rated working pressure of 50 psi. During a routine inspection, you discover a small, non-seeping dent on the exterior of the tank's shell, approximately 1/4 inch deep and 2 inches long. According to general hazmat regulations, what is the appropriate course of action?

   • A.The dent is minor and poses no immediate threat; continue the delivery.
   • B.Document the dent in your logbook and continue the delivery, but have it inspected at the next scheduled maintenance.
   • C.The dent is cosmetic and does not affect the tank's rated working pressure; no action is required.
   • D.Immediately stop the shipment and arrange for a qualified inspector to assess the tank's structural integrity before proceeding.(Correct)

   Explanation

   Damage to a cargo tank, even if non-seeping, can compromise its structural integrity. Hazmat regulations require that cargo tanks be free from defects that could affect their safe operation. A dent, regardless of size, necessitates inspection by a qualified person to ensure the tank's safety before further transport.

3. Question 3Hazardous Materials - Segregation and Compatibility

   A shipment contains a mixed load of UN1993, Flammable Liquid, N.O.S., and UN3082, Environmentally Hazardous Substance, Liquid, N.O.S. The flammable liquid has a flash point of 80°F (26.7°C). The environmentally hazardous substance is a Class 9 material. Are these two materials permitted to be transported together in the same vehicle?

   • A.Yes, if the flammable liquid is in a smaller quantity than the Class 9 material.
   • B.Yes, as long as the total gross weight of each does not exceed 1,000 pounds.
   • C.Yes, provided that proper segregation is maintained and the total quantity of hazardous material does not exceed the limits for placarding.
   • D.No, flammable liquids and environmentally hazardous substances are incompatible and cannot be commingled.(Correct)

   Explanation

   While segregation rules exist for many hazardous materials, flammable liquids (Class 3) and environmentally hazardous substances (Class 9) are generally considered incompatible due to potential reactivity and differing emergency response needs. Commingling them would violate segregation requirements outlined in the Hazardous Materials Regulations (HMR).

Want the full exam? Start the free practice test →

Frequently asked questions

Related practice tests

• CDL General
• CDL Air Brakes
• Alabama DMV
• Alaska DMV