Free Florida CDL Hazmat Endorsement Test Practice Test

Sample CDL Hazmat Endorsement practice questions

Try a few representative questions below. Each includes the correct answer and a short explanation — the same style you'll see in the full practice test.

1. Question 1Placarding

   A commercial motor vehicle (CMV) is placarded for Division 4.1 (Flammable Solids) and Division 5.2 (Organic Peroxides). When transporting these materials together, which placarding requirement takes precedence according to the Hazardous Materials Regulations (HMR)?

   • A.Both Division 4.1 and Division 5.2 placards must be displayed.(Correct)
   • B.If the total gross weight of hazardous materials exceeds 1,000 pounds, both placards are required; otherwise, only the Division 4.1 placard is needed.
   • C.The driver must consult the specific material's Safety Data Sheet (SDS) for a definitive placarding instruction.
   • D.The most restrictive hazard class placarding must be used for the entire shipment.

   Explanation

   When transporting multiple hazardous materials with different hazard classes, the HMR generally requires the vehicle to be placarded for each hazard class present, unless specific exceptions apply. In this case, both Division 4.1 and Division 5.2 placards are necessary to inform emergency responders of the diverse hazards.

2. Question 2Placarding

   You are transporting a shipment of UN1203, Gasoline, in a cargo tank. The maximum quantity of gasoline allowed in the cargo tank is 8,000 gallons. If the tank is filled to 95% capacity, and the gross weight of the vehicle and its contents is 75,000 pounds, what is the primary placarding requirement for this vehicle?

   • A.A "Flammable Liquid" (Class 3) placard is required because the volume of gasoline exceeds 1,000 gallons.(Correct)
   • B.No placarding is required as the gross weight is below the 1,000-pound threshold for placarding.
   • C.A "Flammable Liquid" (Class 3) placard is required because the vehicle is a cargo tank, regardless of quantity.
   • D.A "Flammable Liquid" (Class 3) placard is required because the aggregate gross weight of the hazardous material exceeds 1,000 pounds.

   Explanation

   According to the HMR, a motor vehicle must be placarded for Class 3 (Flammable Liquids) when the aggregate gross weight of all hazardous materials on the vehicle is more than 1,000 pounds. In this scenario, 95% of 8,000 gallons is 7,600 gallons. Even if the weight per gallon is estimated, the total weight will significantly exceed 1,000 pounds, triggering placarding requirements.

3. Question 3Placarding

   A shipment contains UN2810, Toxic liquid, organic, n.o.s., and UN1993, Flammable liquid, n.o.s. The toxic liquid has a net weight of 500 pounds, and the flammable liquid has a net weight of 700 pounds. Both are shipped in non-bulk packaging. What placarding is required?

   • A.Only a "Flammable Liquid" (Class 3) placard is required.
   • B.Only a "Toxic" (Division 6.1) placard is required.
   • C.Both "Toxic" (Division 6.1) and "Flammable Liquid" (Class 3) placards are required.(Correct)
   • D.No placarding is required as the individual quantities are below 1,000 pounds.

   Explanation

   For non-bulk shipments, placarding is required if the aggregate gross weight of hazardous materials requiring the same type of placard is 1,000 pounds or more. However, when different hazard classes are involved, the vehicle must be placarded for each hazard class if the aggregate gross weight of hazardous materials requiring placarding is 1,000 pounds or more. Here, the total hazardous material weight is 1,200 pounds, and both Class 3 and Division 6.1 materials are present, necessitating both placards.

Want the full exam? Start the free practice test →

Frequently asked questions

Related practice tests

• CDL General
• CDL Air Brakes
• Alabama DMV
• Alaska DMV