Free Connecticut CDL Hazmat Endorsement Test Practice Test

Sample CDL Hazmat Endorsement practice questions

Try a few representative questions below. Each includes the correct answer and a short explanation — the same style you'll see in the full practice test.

1. Question 1Placarding Requirements

   A driver transporting a shipment of Division 6.2 (Infectious Substances) in a 5-axle tractor-trailer combination, with a Gross Vehicle Weight Rating (GVWR) of 80,000 lbs, needs to determine the minimum required placarding for the vehicle. The shipment consists of 1,000 lbs of UN2814, Infectious Substance, Affecting Humans, Category A. What is the primary placard required for this shipment?

   • A.POISON
   • B.INFECTIOUS SUBSTANCE(Correct)
   • C.DANGEROUS WHEN WET
   • D.CARGO AIRCRAFT ONLY

   Explanation

   For Division 6.2 materials, the INFECTIOUS SUBSTANCE placard is required when the quantity exceeds 501 lbs (227 kg) for highway transport. Since the shipment is 1,000 lbs, this placard is mandatory. The other options are incorrect: POISON is for Division 6.1, CARGO AIRCRAFT ONLY is for air transport, and DANGEROUS WHEN WET is for Division 4.3.

2. Question 2Placarding Requirements

   You are hauling 15,000 lbs of UN1263, Paint, which is a Class 3 flammable liquid. The total gross weight of your vehicle is 75,000 lbs. According to the placarding table in the Hazardous Materials Regulations (HMR), which of the following is the correct placarding requirement for this load?

   • A.FLAMMABLE LIQUID placard on all four sides of the vehicle.(Correct)
   • B.FLAMMABLE LIQUID placard on the front and rear of the vehicle.
   • C.No placarding is required as the weight is below the threshold for Class 3.
   • D.The vehicle must be placarded with the specific UN number placard for UN1263.

   Explanation

   For Class 3 (Flammable Liquids), placarding is required when the total gross weight of the hazardous material exceeds 1,000 lbs. Since 15,000 lbs of UN1263 is being transported, placarding is mandatory. The HMR requires the FLAMMABLE LIQUID placard to be displayed on all four sides of the vehicle when placarding is required for a Class 3 material.

3. Question 3Mixed Loads and Placarding

   A driver is transporting a mixed load of hazardous materials. One part of the load is 500 lbs of UN1993, Flammable Liquid, N.O.S., and another part is 600 lbs of UN2037, Oxidizer, Liquid. Both are on the same vehicle, and the total gross weight of the vehicle is 60,000 lbs. How should this vehicle be placarded?

   • A.Only the FLAMMABLE LIQUID placard is required because it has a higher hazard class.
   • B.No placarding is required because the individual quantities are below the 1,000 lb threshold for placarding.
   • C.Both FLAMMABLE LIQUID and OXIDIZER placards are required.(Correct)
   • D.The vehicle must be placarded with the DOMESTIC animal placard.

   Explanation

   When transporting different classes of hazardous materials on the same vehicle, the driver must consider the aggregate weight of each class. For Class 3 (UN1993), 500 lbs is below the 1,000 lb threshold for placarding. However, for Division 5.1 (UN2037), 600 lbs exceeds the 500 lb threshold for placarding. Therefore, the OXIDIZER placard is required. If both classes had exceeded their respective placarding thresholds, both placards would be needed. The DOMESTIC animal placard is irrelevant.

Want the full exam? Start the free practice test →

Frequently asked questions

Related practice tests

• CDL General
• CDL Air Brakes
• Alabama DMV
• Alaska DMV